SBC PROFIVE® NUCA

ARM® Single-Board-Computer in embedded NUC™ standard

The PROFIVE® NUCA Single Board Computer is designed in the embedded NUC ™ standard and is based on the NXP i.MX processor series with excellent performance-per-watt performance. This board is a small 10 x 10 cm, very powerful low-power board that is suitable for a wide range of applications, such as: Mobile systems, automation, measurement technology, IoT or many other sectors and industries. It is characterized by a wide input voltage range of 8 VDC to 32 VDC as well as a special pre-installation for the vehicle use, including an input for continous plus (Clip 30) and ignition plus (Clip 15). In addition, a special overvoltage protection circuit for vehicle use is implemented, which in particular takes into account load dump scenarios. Other special features are 2 USB 3.0 sockets, which have a USB 2.0 data support and a USB 3.0 power budget of 900 mA. With it the most different USB modules can be pursued.

  • NXP i.MX6 processor series
  • up to 2GB DDR3L soldered memory onboard
  • 2 Dual-USB 3.0, up to 7 USB 2.0
  • Up to 2 Gigabit Ethernet Ports MICREL KSZ9031RNX (1st GbE port currently limited to 480 MBit/s), Intel® I210 with IEEE1588
  • 1 PCI Express® Mini Card interface with SIM-card slot
  • up to 2 MicroSD-card slots
  • 1 M.2 2242 Key M for SSD
  • 1 RS-232/485 Port
  • 1 UART TTL Port
  • 2 CAN Ports
  • 1 HDMI-Connector
  • 1 24-bit dual channel LVDS-Connector
  • 1 Feature-Connector: SPI, PWM, I2C
  • MIC in, Headphone out
  • min. 8 V to max. 32 V supply voltage range
  • Max. operating temperature: from -40°C to +85 °C ambient temperatur
  • Max. storage temperature: from -40°C to +105°C
  • Max. rel. humidity: 95% @ 40°C, not-condensing
  • Size: approx. 102 mm x 102 mm
  • Supported operating systems: Linux Yocto Project 2.0 w, Android 6.0
  • Design, Production and Support “Made in Germany"
BoxPC-NUCA (ARM®)
NXP i.MX6 processor, 800 MHz
i.MX6 Solo / i.MX6 Quad
ARM® BoxPC with HDMI output
Dimensions: approx. 117 x 120 x 45 mm
Weight: approx. 550g + options

Datasheet


Request Information