x86 single-board computer in embedded NUC™ standard with integrated cooling solution

The industrial PROFIVE® Single Board Computer (SBC) NUCV was designed in the embedded NUC™ standard and is based on the latest AMD Ryzen™ Embedded V1000 platform which features excellent performance per watt as well as a superior integrated graphics unit.

Thus the NUCV SBC is a small (about 10 x 10 cm) and very powerful industrial embedded board, which is perfectly equipped for various applications like AI (artificial intelligence), ML (machine learning), CV (computer vision), Robotics as well as Mobile Systems, Automation, Measurement and IoT.

Different CPUs with a TDP of 12W - 54W1 are used:

V1202B - 2 cores / 4 threads - 2.3 GHz to 3.2 GHz - TDP: 12W - 25W
AMD Radeon™ Vega 3 Graphics
(OEM/ODM version, on request)

V1605B - 4 cores / 8 threads - 2.0 GHz to 3.6 GHz - TDP: 12W - 25W
AMD Radeon™ Vega 8 Graphics

V1756B - 4 cores / 8 threads - 3.25 GHz to 3.6 GHz - TDP: 35W - 54W1
AMD Radeon™ Vega 8 Graphics
(OEM/ODM version, on request)

V1807B - 4 cores / 8 threads - 3.35 GHz to 3.8 GHz - TDP: 35W - 54W1
AMD Radeon™ Vega 11 Graphics

V1404I (embedded CPU with extended temperature range)
4 cores / 8 threads - 2.0 GHz to 3.6 GHz - TDP: 12W - 25W1
AMD Radeon™ Vega 8 Graphics
Ambient temperature range: -40°C to +85°C
ATTENTION: This range is only fulfilled if RAM and SSD also meet this specification.

The NUCV SBC features a wide input voltage range from 8 VDC to 32 VDC as well as a special pre-fitting for vehicle use, including an input for continuous plus (terminal 30) and ignition plus (terminal 15). In addition, a special overvoltage protection circuit is implemented, which takes load-dump scenarios into account in particular.

Equipped with a compact active cooling solution, the single-board computer developed and produced in Germany can be integrated and used immediately.
Three different cooling profiles can be selected via bios settings:

  • Silent Mode (office mode, recommended up to approx. 30°C ambient temperature)
  • Optimized Cooling (default factory setting)
  • Max Cooling

The TDP (12W to 25W) is also configurable via bios settings.

1The NUCV supports only up to 35W TDP settings
  • AMD processors of the V1000 series - V1202B / V1605B / V1756B / V1807B and V1404I (extended temperature range)
  • Powerful integrated GPU - AMD Radeon™ Vega 3 / 8 / 11 Graphics
  • Up to 32 GB memory DDR4
  • 2 Gigabit Ethernet Ports Intel® I210 with IEEE1588
  • 1 MicroSD card slot
  • 3 M.2 - Type B, Type E, Type M
  • 1 SATA (6G) with separate power connector (OEM/ODM only)
  • 1 Dual USB 3.1 Gen2 (10Gb/s, limited by fuse to: 900mA each)
  • 1 Rear USB 3.1 Gen2 (10Gb/s, limited by fuse protection to: 900mA)
  • 1 internal USB 3.1 Gen2 (10Gb/s, limited by fuse protection to: 900mA)
  • 1 RS-232 Port + 1 RS-232/485 Port (only FDX)
  • 1 24-bit dual channel LVDS-Connector (OEM/ODM only)
  • 2 Mini-DP++ connector up to 4096x2160 @ 60Hz
  • fTPM - AMD firmware Trusted Platform Module
  • Min. 8 V up to max. 32 V power supply range / automotive grade
  • Max. Operating temperature range: commercial at 0°C to + 60°C; others on request
  • Max. Storage temperature range: from -40°C to +85°C
  • Max. relative humidity: 95% @ 40°C, non-condensing
  • Dimensions: approx. 113mm x 46mm x 109mm
  • Weight: approx. 330g + options
  • Supported operating Systems: Microsoft® Windows® 10 / 10 IoT Enterprise, Linux Ubuntu 20.04 LTS
  • Design, Production and Support “Made in Germany"

Datasheet with cooling solution

Manual with cooling solution

Request Information